崗位職責：

一、 質量體系 Quality system

1、Support quality system engineer for various system audits , close of non-conformity finding with the quality system engineer
支持質量體系工程師完成各種審核及制定、跟蹤確認改善措施的關閉；

二、 客戶投訴 Customer Concern

1、Responsible for resolution of customer concern use of tooling as 8D /5 Why / Fishbone and document the official report to customer as well as internal team and improvement plan
負責運用8D報告/5Why分析/魚骨圖等質量工具解決客戶投訴問題，并形成正式的報告給客戶以及內部團隊,制定改善計劃
2、Responsible for the valuation of the corrective actions effectivity and durative.do the quality audit regularly.
負責改善措施的有效性和持續性驗證。定期進行質量審核
3、Responsible for the customer audit due to every customer concern.
負責對應針對各客戶投訴的客戶審核
4、Responsible the disposal of Non-conformity parts in customer site include make rework method, verification rework method accordingly and track with the entire rework status.
負責對客戶處不合格品處理方案的制定、確認和進展跟蹤

三、 Production Quality Management 生產質量管理

1、質量培訓 Quality Training
Responsible for quality training to all the staffs in work floor as below following PMG requirement:Quality awareness / Non-conformity management / Quality tooling for problem solving as 8D/tPS/5Why/Fishbone/ / My Quality/Quality Basic/Q-Dash/SPC/MSA/Inspection method and so on
根據公司要求負責質量相關培訓如：質量意識/不合格管理/問題解決的相關工具/我的質量/質量基礎/過程統計/測量系統分析/Q-dash等

2、不合格品管理 Non-conformity management

3、過程質量控制 Process Quality Control
1) Support PE for PFMEA and Control Plan review and improvement, responsible for inspection method and inspection frequency definition and improvement
支持工程評審和完善PFMEA和控制計劃，負責測量方法和測量頻次的定義與完善
2) Responsible for the inspection training and daily audit of the inspection effectivity and durative
負責測量培訓并日常檢查測量有效性與持續性
3) Support for the ECR flow. Participate in the valuation of ECR as well as new machine set up.Responsible for the application and PPAP to customer of ECR if necessary.
支持工程變更流程，并參與工程變更的評估，包括新設備的引進必要時，負責向客戶提交申請和工程變更的PPAP資料

4、生產質量改善 Production Quality Improvement
1) Focus on the reduction of NQC/Internal PPM/Non-standard inspection （rework/100% inspection）
致力于不良質量成本/內部PPM/非標檢測的降低（返工/全檢）
2) Support for the analysis of the quality records and inspection data in Q-Dash for quality improvement
支持對Q-Dash中測量數據和質量記錄的分析以提高產品質量

3) Focus on the definition and improvement of parts valuation standard as well as visual standard following the customer requirement
根據客戶要求，致力于定義和改善產品評價標準，包括外觀標準

四、 APQP of new project 新品項目管理

1) Participate in new project feasibility study
參與新品的可行性分析
2) Responsible for the definition of the inspection method ,design of special gauge.Support for MSA.
負責新品測量方法的定義,專用檢具的設計。支持測量系統分析
3) Responsible for the full dimension report
負責全尺寸報告。
4) Participate in review of PFMEA and control plan.,submission of PPAP documents,, especially for PSW.
參與PFMEA和控制計劃的評審,提交PPAP資料 ,尤其對PSW負責。

五、 Quality Department Work 質量部門工作

1) Focus on achieving and improvement of quality KPI ;
致力于質量KPI的完成和改善；
2) Responsible for quality monthly report and weekly report to direct manager and matrix manager and share with internal team
負責完成質量月報和周報，向直接經理和矩陣經理匯報，并分享至內部團隊；
3) Focus on achieving the budget of quality CIMs and CIP
致力于質量的成本降低和持續改進計劃的達標

六、 Other其他

Follow the requirement and finish the task arranged by manager.
完成并執行經理安排的任務或要求。

崗位要求：

1) More than 3 years working experience in quality engineer
3年以上質量工程師工作經驗.
2) Familiar with APQP, PPAP, FMEA, MSA, etc tools
熟悉APQP、PPAP、FMEA、MSA等工具
3) Knowledge of machining, heat treatment, powder metallurgy
機加工，熱處理知識，粉末冶金一般知識培訓.
4) Good at English speaking, writing, and listening if No PM/Material working experience
非粉末冶金/材料專業者需要必備的英語聽說寫技能
5) Drawing skill: CAD/UG or others drawing skills is necessary
CAD/UG 或者其他必備繪圖技能
6) Good communication skills
良好的溝通能力.
7) Honesty, good professional dedication
誠實可信,良好的敬業精神

工作地點：江蘇揚州江都區大橋鎮興港大道307號